Gunnebo Speedstile Fl Installation Manual -

is an automatic speed gate, characterized by its swing panels (glass or polycarbonate) that open quickly in the direction of traffic. Secure, high-throughput access control.

The SpeedStile FL utilizes an advanced infrared photocell beam matrix to detect tailgating and unauthorized entries.

According to official technical documentation from Gunnebo and partners like Fichet Group : : Bolting Depth : A minimum of 70mm is required. Concrete Resistance : Minimum fckcube 30N/mm² . gunnebo speedstile fl installation manual

Connect card readers, biometric scanners, or ticketing systems to the digital input terminals on the main control board.

If a sensor LED is flashing or red, adjust the internal chassis alignment slightly or clean the optical lens windows using a lint-free microfiber cloth. A solid green light indicates optimal optical alignment. Functional Verification Checklist is an automatic speed gate, characterized by its

across the footprint), and capable of supporting a minimum load of per cabinet.

Remove all tools, packing materials, and personnel from the lane walkway. Turn on the internal circuit breaker. If a sensor LED is flashing or red,

Carefully bolt the glass panels onto the drive rotor assembly using the supplied rubber gaskets and torque screws. Do not over-tighten, as this can crack the glass.

Clean the holes thoroughly using compressed air or a wire brush to ensure secure anchor bonding.

single-phase supply, protected by a dedicated 10A circuit breaker.

Shielded, twisted-pair data cables (typically LiYCY or Cat5e/Cat6 data cables) to link the optical transmitter and receiver arrays across the transit path.