Equatech Universal Tv Wall Mount 32 To 100 Instructions -

Mark four mounting hole locations through the slots in the plate, ensuring they are spaced widely apart for maximum load distribution. Step 3: Drill Pilot Holes and Mount the Wall Plate

Before drilling any holes, you must ensure your television is compatible with the Equatech Universal Mount.

| Feature | Benefit | |---------|---------| | | Supports 100x100mm up to 600x400mm (most 32–100" TVs) | | Weight capacity | Typically up to 70–100 kg (155–220 lbs) — check your model | | Tilt range (if applicable) | -0° to +15° (reduces glare) | | Pull-out/extend | For full-motion models: up to 400mm from wall | | Side-to-side swivel | ±60° (improves viewing angle) | | Post-installation leveling | ±3° micro-adjustment after TV is hung | | Open wall plate design | Allows cable access through cutouts | equatech universal tv wall mount 32 to 100 instructions

Appendix — Quick reference checklist

Use a drill bit sized slightly smaller than the core of your lag bolts (usually a 3/16" or 7/32" bit). Drill straight into the center pencil marks to a depth of roughly 2.5 inches. Mark four mounting hole locations through the slots

By carefully following these instructions, your Equatech Universal TV Wall Mount will safely hold your television for years to come, providing an optimal viewing experience and a clean aesthetic for your living room or home theater. To ensure your setup is perfect, tell me:

The is a heavy-duty solution designed to support a vast range of screen sizes, from 32-inch monitors to massive 100-inch displays. This mount is particularly valued for its high weight capacity (up to 55kg ) and versatile viewing angles, offering flat, 8-degree, and 10-degree tilt options to reduce glare. Pre-Installation Checklist Drill straight into the center pencil marks to

If your TV has a curved rear casing, a bump out at the bottom, or deeply recessed holes, place plastic spacers between the TV bracket and the television body. This creates a flat plane and provides adequate clearance.

. It features a versatile design with three mounting options: a flat profile and tilt adjustments of 8 or 10 degrees to reduce glare and optimize viewing angles. Home Bargains Installation Instructions How to fit wall bracket to back of TV

Now that you have everything ready, let's get started. Here is a step-by-step guide, using the specifications of the Equatech mount.