(e.g., flashing ink light vs. paper light) Fixing Wi-Fi connection issues Print quality issues (e.g., missing colors)
This process clears all customized network settings, scan settings, and default print settings. Ensure the printer is . Locate the control panel.
Temporarily disable your computer's antivirus or firewall software, as these can occasionally block the Epson installer from communicating with the network. Flashing Ink or Paper Lights After a Reset epson et 2400 reset install
Disconnect any USB cables connecting the printer to your computer. Wait at least .
: a power-cycle reset (to clear minor errors) and a full factory reset (to restore default settings). 1. Hard Reset (Power Reset) Locate the control panel
: If the printer is unresponsive with flashing orange lights, look for the "Recovery Mode" firmware file under the downloads section on the Epson site to restore it. Critical Troubleshooting
: If the printer is installed but printing blank pages, hold the Cancel button for 5 seconds to initiate a print head cleaning. Wait at least
If Windows installs a generic "USB Printing Support" driver instead of the full Epson suite, you will lose access to scanning utilities and ink monitoring. To fix this, run the downloaded Epson Combo Package again and select "Repair" or "Reinstall".
⚠️ Resetting the counter without replacing/cleaning the physical pads can cause ink to overflow and damage your printer. Only proceed if you have serviced the pads.
Turn the printer off, then hold down the Network/Wi-Fi button and the Power button together for about 5 seconds until the lights flash.
If your printer is connected to a computer via USB or Wi-Fi, you can restore all settings to default using the Epson Web Config utility.