--- Epcos Power Factor Controller Br 5016 Manual Pdf 2021 Now

Always pair capacitors with detuning reactors (inductors) to shift the resonant frequency of the system below the lowest dominant harmonic (usually the 5th harmonic, 250 Hz).

Avoid third-party sites that require payment or credit card information. TDK/EPCOS distributes this manual free of charge.

The BR 5016 features an intuitive menu structure divided into three main levels: 1. Display Mode (Default) In this mode, the device shows real-time data including: Current Power Factor (cos φ) Active and Reactive Current Harmonic Distortion (THD-V / THD-I) Temperature of the PFC system 2. Programming Mode (Expert Level)

Disclaimer: This document serves as a high-level technical overview. Always reference the exact factory-issued specific to your device's firmware version prior to executing wiring or parameter modifications.

Using the wrong manual can lead to incorrect CT scaling or dangerous over-correction.

Implement detuned reactors to protect capacitors from harmonic resonance.

: Connect voltage inputs to phases L2 and L3.

: Trips the system if Total Harmonic Distortion (THD) exceeds safe levels, preventing capacitor resonance.

Up to 16 programmable relay outputs for capacitor branches.

In this post, we cover the essential features of the BR 5016, why you need the manual, and how to access the for your setup.

Critical Safety Note. The discharge time must be set according to the capacitor's discharge device (typically 60 seconds). Setting this too short can cause inrush current damage or fire.

Install the Current Transformer (CT) on the main incoming phase. Ensure the CT polarity (

Configure the discharge/re-connection delay time. Never set the re-connection time shorter than the discharge time of your capacitors (typically 60 seconds) to prevent explosive out-of-phase re-switching. 4. Alarms, Troubleshooting, and Error Codes

If you cannot find the manual through the official TDK site, try searching specifically for as this covers the entire range, including the 5016.

Below, we provide a detailed walkthrough of the BR 5016, including where to find the official manual, how to interpret its most critical sections, and how to optimize your capacitor bank for maximum savings.