Canon Service Tool V3800 ~repack~ (2025)
Resetting the digital counter does not magically empty the physical sponge inside your printer. If you reset the counter multiple times without cleaning or replacing the physical waste ink pads, ink will eventually leak out of the bottom of the machine, ruining your desk or flooring.
The printer model is not supported by this specific version of the software.
While newer versions of the Service Tool exist, v3800 is known to be compatible with many older to mid-era PIXMA models, including: PIXMA iP series PIXMA MG series (e.g., MG5300, MG6200, MG8200) PIXMA MX series (e.g., MX710, MX880) canon service tool v3800
However, respect the hardware. Use the tool to reset the counter, but do not ignore the physical waste ink pads. Open your printer every two years, air out the pads, and consider installing an external waste tank.
Click the EEPROM button in the top-right corner. This will command the printer to feed a sheet of paper and print out its current system log, confirming that the tool is communicating correctly with the hardware. Reset Waste Ink Counter: Locate the Clear Ink Counter section. Resetting the digital counter does not magically empty
Canon Service Tool v3800: The Ultimate Guide to Resetting Your Canon Printer
Canon programs a digital counter into the printer's motherboard. Every micro-drop of discarded ink increments this counter. Once the system calculates that the physical pads are likely saturated, it triggers error codes like or 1700 . The printer then completely locks up to prevent ink from leaking out of the base and damaging your desk or internal electronics. While newer versions of the Service Tool exist,
After resetting with V3800, always print an EEPROM information page (by clicking "EEPROM" in the tool). Check the "Dd" value (Absorber counter). It should read 0.0 to 0.3. If it says 0.0, you succeeded.
Reads, writes, and clears the printer's non-volatile memory.
The Canon Service Tool v3800 is a software utility developed to interface directly with Canon inkjet printers via a USB connection. It acts as a service-mode program, allowing authorized personnel (and sometimes savvy users) to perform maintenance tasks 1.2.1 .
